Three tables for a complete system: 180º U-turn conveyor belt table, a straight return conveyor and a 90º unit for storage and inspection. See here: https://nsmaquinas.com/large-parts-co...
► SMALL, LARGE, LIGHT, OR HEAVY METAL PARTS The automatic system is prepared to work with small, large, light, or heavy metal parts. All the tables are connected to allow a smooth transition with rollers. The structure is robust enough for heavy parts and with the same 1100mm width of the machine capacity.
►SINGLE OPERATOR PROCESS A single operator work is possible since while he is feeding the machine with parts, the automatic system is moving them to the stationary table. It avoids moving to the machine exit every time a metal part is finishing the deburring process. ►COMPLETE RETURN SYSTEM Unloading system with 2 different tables: 1) 180 degrees motorized table and 2) motorized straight table. All those tables move the parts from the machine exit to the front side of the machine.
►STORAGE AREA The storage table is important to guarantee that the parts can be stored or inspected without immediate action from the operator. On this table parts can be turned and proceed to a double side process. You can see all the details about this system on our page at nsmaquinas.com: https://nsmaquinas.com/large-parts-co... If you need more information about this, please contact us through our firstname.lastname@example.org in Vietnam or on the contact page: http://oremec.com/index.php?route=information/contact